It is preferable that the elastomer has an potential to be modified in order that a softened polyphenylene sulfide, which is prepared by mixing with the elastomer and kneading them with melting, has a flexural modulus of at most 30000 (ASTM D 790) and a tensile elongation at break of not less than 5% (ASTM D 638). Representative examples of such an elastomer are, for instance, an olefin copolymer containing an epoxy group (ethylene content: 88% by weight, glycidyl methacrylate content: 12% y weight), a hydrogenated styrenebutadience copolymer (TUFTEC M 1913 commercially accessible from Asahi Chemical Industry Co., Ltd.), an ethylene-propylene copolymer (TAFMER PO 680 commercially obtainable from MITSUI PETRO CHEMICAL INDUSTRIES, LTD.), and the like. Because the polyphenylene sulfide which might be employed within the electrostatic coating technique of powder, both of the linear polyphenylene sulfide and the crosslinked polyphenylene sulfide can be utilized, and if a thin movie having a thickness of at most 0.1 mm may be formed, there is no necessity to add an elastomer thereto.

However, there are a number of issues, within the control cable wherein a lubricant is used, comparable to issue of operation for coating because dispersion of the load effectivity of products is brought on by the unevenness of a coating, rubbishes and dusts are easily adhered to the lubricant when making use of the lubricant to the management cable, and drip and the like are generated. As the above-talked about organopolysiloxane having an ultra-high viscosity, a linear organopolysiloxane, a branched organopolysiloxane and the like could be exemplified. Because the above-mentioned organopolysiloxane having a lower viscosity, a linear organopolysiloxane and a branched organopolysiloxane are cited. It is especially preferable that the content material of the organopolysiloxane having an extremely-excessive viscosity is 50 to 80% by weight and the content of the organopolysiloxane having a lower viscosity is 50 to 20% by weight. In the current invention, because the organopolysiloxane having an ultra-excessive viscosity and the organopolysiloxane having a lower viscosity are dispersively contained in the thermoplastic resin used within the above-mentioned liner, it's in fact that there is no such thing as a necessity to make use of a lubricant between the interspace of the conduit and the inner cable, and a superb operate that the sliding operation of the conduit and the interior cable might be easily carried out for an extended time frame, is exhibited.

However, when a organopolysiloxane having too low a viscosity is contained in a big amount in the resin, there's a problem that the organopolysiloxane cannot be effectively extruded to produce a liner, and thus the molding can't be carried out due to the slipping of the resin on the cylinder barrel within the extruder. Within the above-talked about liner, a thermoplastic resin containing 13 to 20% by weight of an dispersed in the resin, is used. Then again, a large amount of the organopolysiloxane having a high viscosity will be contained in the resin, and the molding might be carried out with out slipping. When the kinematic viscosity exceeds 10000 cSt, the organopolysiloxane doesn't bleed out from the thermoplastic resin sufficiently, and the load effectivity is lowered. Examples of the thermoplastic resin used in the above-mentioned liner are, for instance, polybutylene terephthalate, polyoxymethylene, polyamide represented by 1-nylon and 6,6-nylon, and the like, however the current invention will not be restricted to the exemplified ones and other thermoplastic resins can be used as far as the object of the current invention may be completed.

Among them, dimethylpolysiloxane is especially preferable from the viewpoint of lubricationability between the thermoplastic resin of the liner and that of the internal coat, thermal resistance, cost, and the like. Among them, dimethylpolysiloxane is particularly preferable from the viewpoint of lubricationability between the thermoplastic resin of the liner and that of the interior coat, thermal resistance, price and the like. Among the above-mentioned thermoplastic resins, polybutylene terephthalate having a melt index of 0.1 to 5 g/10 minutes might be significantly ideally used because the change of load effectivity is small when the control cable is used for a protracted time frame. The quantities of the organopolysiloxane having an ultra-high viscosity and the organopolysiloxane having a lower viscosity contained within the thermoplastic resin of the above-mentioned liner are adjusted in order that the organopolysiloxane is composed of forty five to 85% by weight of the organopolysiloxane having an extremely-high viscosity and fifty five to 15% by weight of the organopolysiloxane having a lower viscosity. The consultant examples of the organopolysiloxane having a decrease viscosity are, for example, dimethylpolysiloxane, methylalkylpolysiloxane, methylphenylpolysiloxane, methylaminoalkylpolysiloxane, methylfluoroalkylpolysiloxane, and the like.